#Diy a frame ladder shelf plans how to#

Measure and cut each outer length separately so the sloping fit of your unit is bespoke to your space. If you have an uneven or wonky floor, you can easily level your unit with two simple cuts.

To ensure the sloping cut angle of your unit and shelves are correct and consistent, we recommend using an adjustable bevel or carpenter’s square throughout this project.Ensure your timber is securely clamped, then slowly cut along your scribed line with a clean and sharp saw blade. If you don’t have access to power tools, this project can also be completed with a universal saw. Using a chop saw or circular saw will ensure that your timber is cut accurately with precision speed.To ensure the 5 shelves that were cut from one 2.4m length were equal, we allowed for a 2mm tolerance per cut, so each shelf measured 478.4mm. Depending on the tolerance of your tools, you may find that the dimensions are adjusted by between 2-3mm. Consider the tolerance, runout and alignment of your power saw blades when making cuts.

If you choose to use our cutting list a guide, it’s a good idea to draw up your design and tweak the measurements before you begin to ensure you have enough materials to hand.

This project is entirely custom and can be designed to suit your unique spaces, taste and style.

This project will take a DIYer with moderate experience approximately two hours to build, however, to ensure the paint has sufficient time to dry we recommend leaving your project to dry at room temperature for 24 to 48 hours.

If you choose to follow our cutting list, the materials including paint will cost under £55 and are all available from Wickes.

We used redwood PSE timber and a brightly coloured interior wood paint however, you can experiment with different timbers, colours and finishes to suit your style and spaces.

Of course, you can completely customise the height, width, depth and angle of the ladder to suit your space and requirements. Two of the lengths are used as the sides and one length is cut into equally sized shelves.

We designed our ladder shelving to maximise three lengths of 2.4m timber for minimal waste.

If you choose to follow our guide, the ladder shelving will measure approximately 520 X 2400mm. This build is entirely custom and bespoke to your style, space and storage needs.

Our step by step instructions and cutting list have been designed as a guideline.

Ideal for renters, those who like to move furniture around or prefer non-fitted storage, ladder shelving also sidesteps the need to fit around skirting boards or other obstacles as they slope at a gradual angle, leaning against the wall.

Not just for storing books, ladder shelving can be made in any size and used in many areas of the home for plants, ornaments, frames and even hanging towels.

Ladder shelving is a great choice if you’re looking for a fun and quirky storage solution.

#Diy a frame ladder shelf plans how to#

We are going to show you how to build a ladder shelving unit step by step.